Skip to main content

We are open abbreviated hours: tues-fri 11am-6pm, sat 10am-6pm. Due to covid-19 we are not allowing customers in the shop at this time. Please knock on the door, stand behind the table, and we’ll come help you.

Filter By:

Ibis

Ibis Hakka MX
Call for build options and availability It’s good to have options. With the Hak­ka MX, you can run road, cross and grav­el friend­ly 700c wheels, or if you are into burli­er back­coun­try explo­ration, go with 27.5/650b. With the Hak­ka MX, you don’t have to pick one tire option or the oth­er. Our sub­tle sculpt­ed chain­stays give the frame clear­ance for up to 700 x 40c or 27.5 x 2.1” tires.
Ibis Mojo HD5
Call for build options and availability. Enduro World Series tested and team-approved, the HD5 lives for ragged descents combined with real-world climbs requiring efficiency, positioning and poise. Which it delivers in spades. It’s the ultimate 27.5” brawler, living to ride as hard up as down with 153mm of dw-link controlled travel and a 170mm fork. 76 degrees of climbing we'd like you to meet 64.2 degrees of descending. Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing.
Ibis Ripley
Call for build options, and availability. With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er off­set fork makes it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing.
Ibis Ripmo 2
Call for build options and availability What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn’t wan­der while climb­ing, and doesn’t hold you back descend­ing. It works?—?all day up, all day down, all day in between.
Ibis Ripmo AF
Call for build options and availability Over our long tenure from moun­tain biking’s awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we’ve exper­i­ment­ed with steel, alu­minum and tita­ni­um?—?remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down.
Page 1 of 1