Parts

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

“Make a Grip with the fussiest rider on the Planet, you must be mad!” The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3 x World Champion Greg Minnaar over the the 2018 season to hone the construction of the grip to produce unrivalled vibration dampening. The unique supple pattern combined with 30A rubber compound combines control and comfort in equal measures. Whilst 31.5mm diameter gives an ergonomically pleasing feel even on the most white knuckle tracks. To top it all off it's securely clamped by a 7075 Aluminium collar and stainless steel bolt. Greg's signature grip uses the same ultra thin tapered core as Burgtec's current Bartender. 9 Colours: Burgtec Black, Race Red, Deep Blue, Purple Rain, Gum, Iron Bro Orange, Electric Yellow, Nasa Grey, Toxic Barbie Pink 31.5mm Diameter. 30A Rubber Compound. Single Lock On Tapered Core

Enduro has evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect. Forged and Fully CNC machined from AL6061 – T6 Aluminium Stainless Steel Hardware Available lengths – 35mm, 42.5mm and 50mm Available in both 31.8mm (Black only) and 35mm Clamp Weight; 35mm 138g, 42.5mm 152g , 50mm 160g 9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie Pink

Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?". From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours. Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. - Forged and Fully CNC machined from AL6061 – T6 Aluminium - Stainless Steel Hardware - Available lengths - 35mm, 42.5mm and 50mm - Available in both 31.8mm (Black only) and 35mm Clamp - Weight: 35mm 138g, 42.5mm 152g, 50mm 160g

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and adding the most wear-resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal. Weight: 379g (Steel Axle) Platform material: 7075 Alloy Profile: 15mm Platform: 100mm x 102mm Dish: 2mm (concave) Pin material: Stainless steel Pin width: 3.5mm Pin height: 4.5mm Axle Material: EN24T Steel Internals: 2 x Igus W300 bushes, single sealed bearing and inboard rubber oil seal Colours available: Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold, Toxic Barbie Pink (Available in stores only)

Unmatched comfort and unquestionably superior vibration dampening properties. The Burgtec Ride Wide Carbon Enduro Handlebars built to take a beating. Uni-Directional Carbon 800mm Wide 35mm Bar Clamp 20mm Rise 9º Backsweep 5º Upsweep 258g Rise

As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control. UD Carbon finish 800mm wide Available in 31.8mm / 35mm bar bore 20mm rise 9 degree Backsweep 4 degree Upsweep Suggested cut down marks Weight 280g

As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control. UD Carbon finish 800mm wide Available in 31.8mm / 35mm bar bore 30mm rise 9 degree Backsweep 4 degree Upsweep Suggested cut down marks Weight 280g

The eeWings Mountain titanium cranks were designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness, and weight. - Ultimate in stiffness and durability while only weighing a mere 400 grams—in the same weight range as premium carbon cranks, but 20% to 30% stiffer - CNC aluminum BB preload adjustment ring included - Fitment compatibility across multiple frame standards, bottom bracket sold separately - 176mm Q-Factor - 30mm spindle is compatible with the following bottom brackets: BSA73mm, PF92/89.5, BB30 (External Bearing Only), PF30 (External Bearing Only), and 392EVO - Backed with a 10-year limited warranty - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 157 Super Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: 392 EVO , BB30/PF30 , RaceFace/Easton CINCH - Chainring BCD: Direct Mount SRAM - Weight: 400 - BB Included: No

Chris King Threadfit Bottom Bracket Conversions to mate your King ThreadFit BB to your chosen frame and crank spindle.

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

No Longer in Production Each Press Fit 30 bottom bracket includes our exclusive fully serviceable made-in-house bearings that integrate with our easy-to-use grease injection system to create a bottom bracket with unparalleled performance and durability. Our Press Fit 30 bottom bracket is machined to aerospace-level tolerances to ensure that your bike has the precision fit that you have come to expect from Chris King’s legendary components. • Engineered, manufactured and assembled in Portland, Oregon USA • 5-year built-to-last warranty • Legendary made-in-house bearings • Responsibly lightweight • Easily serviceable with our integrated grease injection tool • Designed for BB shells with a 46mm ID (Inner Diameter) measurement • Find your fit with our required conversion kits

We started making headsets in 1976 and have been refining them ever since. Our DropSet™ headsets are built to be precise and dependable and set the standard for quality integrated headset function delivering precision performance that is built on the same pedigree of Chris King headsets from the past 40 years. Engineered, manufactured and assembled in Portland, Oregon USA King Lifetime Warranty Legendary made-in-house bearings Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517)

Built on the familiar BSA threading, the ThreadFit™ 30 is reliable. A silky smooth, long-lasting bottom bracket built around our angular contact bearings that wear in instead of out. The ThreadFit™30 is made for 30mm spindles. Fully serviceable and backed by our 5-year built-to-last warranty this bottom bracket will outlast your bike. Built to ultra tight aerospace tolerances we use machined Delrin spindle sleeves to create a perfect, and precise, fit between cranks and frame, providing ultra low drag, and a butter smooth feel. Our our ThreadFit™30 is ready for a wide selection of cranks. The Fit Kit for our ThreadFit™ 30 with 30mm spindle cranks is available here. The Fit Kit for DUB cranks is available here. • Engineered, manufactured and assembled in Portland, Oregon USA • King Lifetime Warranty • Legendary made-in-house bearings • Available in 10 beautifully anodized colors • A Fit Kit is required for use and included in the purchase price • Ceramic bearing upgrade available • Uses Chris King bottom bracket cup tool for installation

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface  - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

The DMR DeathGrip is the second collaboration between DMR and Brendog. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound. • NEW colours added to the DMR Brendog DeathGrip range for 2021. • Tapered Core | No need for outer lock ring • Waffle and Knurl for grip • Mushroom for comfort • Available in Thin (ø29.8) or Thick (ø31.3) • Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. • 100g per pair

This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. - Allows for easy installation on Rock Shox Torque Cap compatible forks

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. - Allows for easy installation on Rock Shox Torque Cap compatible forks

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Seal kits for DVO suspension forks. - Fits Onyx DC and SC forks

Replacement air cap for Diamond model suspension forks.

Damper rebuild kit for Topaz model rear shocks.