Filter By:
- Bottom Brackets (3)
- Brakes/Levers/Pads (28)
- Cables (7)
- Cassettes/Freewheels (6)
- Chains (7)
- Chainrings (12)
- Cranksets (6)
- Derailleurs (8)
- Show More Categories
- Forks (1)
- Grips (13)
- Groups (1)
- Handlebars (12)
- Handlebar Tape (2)
- Headsets (2)
- Pedals (7)
- Seatposts (2)
- Stems (2)
- Saddles/Pads (5)
- Tires (37)
- Other (62)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$15.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$20.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$24.99 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$9.99
Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.
$27.00
“Make a Grip with the fussiest rider on the Planet, you must be mad!”
The Bartender Pro is the next level in grip design for Burgtec.
We've collaborated with 3 x World Champion Greg Minnaar over the the 2018 season to hone the construction of the grip to produce unrivalled vibration dampening.
The unique supple pattern combined with 30A rubber compound combines control and comfort in equal measures.
Whilst 31.5mm diameter gives an ergonomically pleasing feel even on the most white knuckle tracks.
To top it all off it's securely clamped by a 7075 Aluminium collar and stainless steel bolt.
Greg's signature grip uses the same ultra thin tapered core as Burgtec's current Bartender.
9 Colours: Burgtec Black, Race Red, Deep Blue, Purple Rain, Gum, Iron Bro Orange, Electric Yellow, Nasa Grey, Toxic Barbie Pink
31.5mm Diameter.
30A Rubber Compound.
Single Lock On
Tapered Core
$120.00 - $125.00
$125.00
Up to 4% Off
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect.
Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem.
We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?".
From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.
Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours.
Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender.
- Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Stainless Steel Hardware
- Available lengths - 35mm, 42.5mm and 50mm
- Available in both 31.8mm (Black only) and 35mm Clamp
- Weight: 35mm 138g, 42.5mm 152g, 50mm 160g
$160.00
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and adding the most wear-resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal.
Weight: 379g (Steel Axle)
Platform material: 7075 Alloy
Profile: 15mm
Platform: 100mm x 102mm
Dish: 2mm (concave)
Pin material: Stainless steel
Pin width: 3.5mm
Pin height: 4.5mm
Axle Material: EN24T Steel
Internals: 2 x Igus W300 bushes, single sealed bearing and inboard rubber oil seal
Colours available: Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold, Toxic Barbie Pink (Available in stores only)
$190.00
As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control.
UD Carbon finish
800mm wide
Available in 31.8mm / 35mm bar bore
20mm rise
9 degree Backsweep
4 degree Upsweep
Suggested cut down marks
Weight 280g
$190.00
As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control.
UD Carbon finish
800mm wide
Available in 31.8mm / 35mm bar bore
30mm rise
9 degree Backsweep
4 degree Upsweep
Suggested cut down marks
Weight 280g
$1,049.00 - $1,100.00
The eeWings Mountain titanium cranks were designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness, and weight.
- Ultimate in stiffness and durability while only weighing a mere 400 grams—in the same weight range as premium carbon cranks, but 20% to 30% stiffer
- CNC aluminum BB preload adjustment ring included
- Fitment compatibility across multiple frame standards, bottom bracket sold separately
- 176mm Q-Factor
- 30mm spindle is compatible with the following bottom brackets: BSA73mm, PF92/89.5, BB30 (External Bearing Only), PF30 (External Bearing Only), and 392EVO
- Backed with a 10-year limited warranty
- Number of Chainrings: No Rings, No Spider Included
- Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 157 Super Boost Hubs
- Crank Intended Use: Mountain
- Pedal Spindle: 9/16"
- Spindle Interface Type: 392 EVO , BB30/PF30 , RaceFace/Easton CINCH
- Chainring BCD: Direct Mount SRAM
- Weight: 400
- BB Included: No
Chris King Threadfit Bottom Bracket Conversions to mate your King ThreadFit BB to your chosen frame and crank spindle.
$144.00 - $207.00
We started making headsets in 1976 and have been refining them ever since. Our DropSet™ headsets are built to be precise and dependable and set the standard for quality integrated headset function delivering precision performance that is built on the same pedigree of Chris King headsets from the past 40 years.
Engineered, manufactured and assembled in Portland, Oregon USA
King Lifetime Warranty
Legendary made-in-house bearings
Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517)
$94.95 - $99.95
Argotal is the ideal tire for loose terrain, with cornering stability and increased side-grip. The open tread pattern allows for self-cleaning so you can push your riding limits through dust and loam.
- Supported in-line shoulder studs with supportive structure for high stability even when cornering aggressively to provide high mechanical grip especially in loose soils
- Open tread pattern design for perfect interaction on loose surfaces with good self-cleaning in moist and wet conditions
- The pronounced studs are equipped with steep ramps in order to generate mechanical grip through a pattern-soil interaction for expectational grip in on loose and mixed surface
- Downhill Casing features a durable and reinforced carcass construction with supple and vivid characteristics
- Soft-Compound offers a balance of grip and rolling resistance for gravity focused use cases. A high level of grip with a reasonable rolling resistance for optimized rolling properties Enduro or Trail riding
- E25 e-bike rating features a high quality structure with puncture protection to reduce premature wear brought about by the additional driving force
$27.00
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees
$149.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm
Includes:
- 2 CushCore Inserts
- 2 CushCore Tubeless Air Valves
- 4 Rim Stickers
- Installation Instructions
$29.00 - $32.00
The DMR DeathGrip is the second collaboration between DMR and Brendog.
We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound.
• NEW colours added to the DMR Brendog DeathGrip range for 2021.
• Tapered Core | No need for outer lock ring
• Waffle and Knurl for grip
• Mushroom for comfort
• Available in Thin (ø29.8) or Thick (ø31.3)
• Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A.
• 100g per pair
$147.00 - $165.00
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow.
- 105x115mm pedal body
- 17mm concave foot bed
- Extruded 6061 aluminum body and 4140 chromoly steel axles
- High-load DU bushing and cartridge bearing
- 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired
- 9/16"
$170.00 - $179.90
- Gigantic, lightweight aluminum platform with concave foot bed
- High-load DU bushing and cartridge bearing
- Included Flip Pins are blue. Silver, black, red, or gold pins are sold separately
- DM-1837 Brendog Brendan Fairclough signature model
- 105 x 115 x 17mm
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 18307 Bearing
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control.
- Allows for easy installation on Rock Shox Torque Cap compatible forks
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control.
- Allows for easy installation on Rock Shox Torque Cap compatible forks
$2.60
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Star Ratchet Spring
$6.10
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 3 Pawl Ring Nut
$25.00
Seal kit replacement for Diamond model suspension forks.
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 34.9mm, Black
$17.00
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 36.4mm, Platinum
$20.00
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 36.4mm, Black
$20.00
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 36.4mm, Blue
$20.00
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 36.4mm, Green
$20.00
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 36.4mm, Red
$21.99 - $28.00
The grip of choice for World Cup-style assassin and gloveless wonder, Sam Blenkinsop, the KNUCKLEDUSTER embodies our attention to detail and our focus on function! Not only have we developed our TRC rubber blend that gives you remarkable grip with incredible durability, the KNUCKLEDUSTER also features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and, coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel in a stunning package.
Featuring a mushroom pattern to minimize vibration, the true magic of the KNUCKLEDUSTER lies in the V channel chevron ribs that ergonomically fill the swell of your palm and then seamlessly transition to a recessed half waffle on the underside. Why is this magic? All half waffle patterns are outboard and are notorious for creating hot spots on long rides. By designing the top to seamlessly transition to a recessed half waffle pattern, your fingers sit perfectly into the grip and allow you full control even in the roughest of conditions without being plagued by hot spots or blisters. The KNUCKLEDUSTER grips truly are an "all day grip" that allow you to keep it Pinned Wide Open at all times!
- The benchmark in grip design
- DIRT MAG Top 100 Product for 2018
- Featuring DEITY TRC rubber compound for exceptional durability
- Tapered inner sleeve to ensure perfect contact with the handlebar
- Single clamp design with forward-facing bolts that feature Loctite
- Lasered black-ano 6061-T6 aluminum clamps
- Short and wide rib design for added comfort with no side-to-side play
- Half-waffle recessed design for added control without hot spots
- Chevron v-channel design for your palm swell to give an ergonomic feel
- Seamless transition through the end of grip for comfort
- 132mm length with 32mm outer diameter
- Intended use: All MTN / Enduro / DJ / Slopestyle and DH
- 101 grams for the set
$28.00
We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability.
- 34mm outer diameter with plush cushioning throughout
- Deep-dish DEITY diamond pattern compresses for comfort but also provides traction
- Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip
- Tapered inner sleeve to insure perfect contact with the handlebar
- Single clamp design with forward-facing bolts that feature Loctite
- Lasered black ano 6061 T6 aluminum clamps
- Seamless transition through the end of the grip for comfort
- Capped end for safety and comfort
- 133mm length with 34mm outer diameter
- Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice
- 118 grams for the set
Bottom Brackets are an essential part of the bicycle that is often overlooked and forgotten, but we saw the BB as another opportunity for performance gains and improved efficiency. For our BB we have developed a seal that achieves a very low level of drag while still retaining excellent protection qualities. Its thinner and low viscosity bearing grease with the correct fill level offers higher durability at high speeds. If you're running the best crankset on the market, you should have the performance BB to match.
- Thinner and lower viscosity bearing grease for higher durability at high speeds
- In-house testing procedure includes developing a 24-hour continuous water invasion test
- Offered in a variety of types for better compatibility
- 386 EVO 46mm Press fit, 30mm Spindle, 103gm, 86.5mm
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
34 Rhythm Air Shaft Assembly for Fox suspension fork service and repair.
$20.00
Volume tuning kits for Fox rear suspension service and repair.
$70.00
Transfer Dropper Post Remote
A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat.
- 22.2 1x Remote I-Spec EV
$150.00 - $309.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Remote lever sold separately
- 0mm offset
$25.00
FSA Standard Headset Bearings
$18.94 - $33.90
Shimano XTR/XT/SLX 2-Piston Compatible Disc Brake Pads
$62.00 - $91.05
Every high-quality, Galfer-patented Wave® MTB Centerlock disc rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Wave design comes from the Galfer motorcycle division and has been used across many disciplines at the highest level. Not compatible with Fulcrum AFS System.
- Wave ® design keeps brakes extremely cool in demanding conditions
- Made with a proprietary blend of 420 virgin stainless steel with high carbon content that provides better memory and friction
- Laser cut to reduce the stress of the steel during production
- Includes lockring
- Precision made at the Galfer factory in Barcelona, Spain
Brake Pads for your Dominion A2 come in 2 flavors:
Sintered T100
- Sintered metallic friction material provides maximum stopping power in wet and dry conditions.
Semi-metallic T106
- Friction material provides enhanced modulation and silent operation.
$34.99
The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Brake pads for your Dominion A4 come in 2 flavors:
Sintered T100
Sintered metallic friction material provides maximum stopping power in wet and dry conditions.
Semi-metallic T106
(aka free-range organic) friction material provides enhanced modulation and silent operation. Gluten-Free.
Includes 2 pads, retention screw.
$249.99
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop!
Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness.
With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance.
Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise.
Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand.
Key Features:
- Tool-Free Reach Adjustment
- Flip-Flop Lever Orientation
- King Pin Pad Retention
- Crosshair Caliper Alignment
- Two-Stroke Dual-port bleed system
Specifications:
- 310g (100cm hose and mount hardware)
- DOT 5.1 Fluid
- Tool-Free Reach Adjustment
- 2-Stroke Dual Port Bleed System
- Sealed Cartridge Bearings Lever Pivot
- 100cm Front Hose Length
- 180cm Rear Hose Length
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$4.28
Brass hose insert for Hope hydraulic disc brakes.
$10.66 - $75.00
Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own
FEATURES
- Constructed in two parts, aluminium centre and stainless steel braking surface.
- High performance disc, allowing the stainless steel outer to expand separately
from the centre and handle high temperatures without warping.
- Hope floating rotors have a true floating design which allows 1 degree of freedom.
This means the outer is always free to expand when subjected to heat.
- Lightweight design.
- Aluminium centre acts as heat sink keeping disc temperatures lower.
- CNC machined centre is stiff and lightweight so has the advantages
of a thicker fixed disc without the weight penalty.
$21.00 - $25.00
All our brake pads are designed and dyno tested in-house at Barnoldswick
All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity
We keep a wide range of pads to suit all our brakes
Almost all our brake pads are available in sintered or standard compound options
All our brake pads come with the necessary hardware
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Page 1 of 4
Next page