Skip to main content

We are open for in-store shopping!

**WE WON'T BE CHECKING COVID CARDS, SO MASKS REQUIRED WHETHER YOU ARE VACCINATED OR NOT.**

Filter By:

Hubs

DT Swiss 350 MTB Rear Hub
$267.90 - $315.00
Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
DT Swiss 240 Classic MTB Front Hub
$235.90
The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
DT Swiss 350 MTB Front Hub
$109.00
Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Chris King ISO AB Front Hub
The ISO AB is specifically for “Boost” disc spacing forks with 110x15mm "Boost" or 110x20mm "Boost" axles. Using the larger diameter hubshell bearing the ISO AB is designed to tackle rough terrain and aggressive riding such as downhill and enduro. In an evolving landscape of axle specifications, we are confident that the “Boost” disc location is here to stay. With the ISO AB hub your wheel will be future proof and ready to convert to the new 110x20mm axle with a simple insert swap, should that spec expand beyond downhill forks in the coming years. Chris King ISO AB front hubs are designed as precision mountain tools. We use one-piece axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, ISO hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra low drag. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. Engineered, manufactured and assembled in Portland, Oregon USA King Lifetime Warranty Wide flange placement Fits 110x15mm Boost, or 110x20mm Boost axles 110x15mm Boost Torque Caps available Legendary made-in-house LD bearings Easily serviceable with a 2.5mm hex and pick or pen knife Completely re-buildable with our ISO Hub Service Tool Responsibly lightweight Ceramic bearing upgrade available Available in 24, 28, and 32 hole spoke count
Chris King ISO B Rear Hub
Chris King ISO B 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, ISO B hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. Engineered, manufactured and assembled in Portland, Oregon USA King Lifetime Warranty Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Legendary made-in-house bearings 24h, 28h, and 32h Available with Micro Spline, HG or XD driveshell. Easily serviceable with a 2.5mm hex and pick or pen knife Completely re-buildable with our ISO Hub Service Tool Responsibly lightweight Ceramic bearing upgrade available Specifically designed for "BOOST" 148mm x 12mm axle standard
Page 1 of 1