Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Mountain Bikes

*Bike price includes our professional assembly fee but does not include the $15 per bike Oregon State Bike Tax.

$6,299.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels. GEOMETRY The 29" front wheel, bol­stered by 180mm of trav­el, assures sta­bil­i­ty, whereas the 27.5" rear wheel allows for addi­tion­al maneu­ver­abil­i­ty. The 165mm of trav­el skill­ful­ly man­ages any fall­out. With a 64-degree head tube angle (one degree slack­er than the cur­rent Rip­mo), a BB height sim­i­lar to Mojo HD5, and chain­stay length iden­ti­cal to the cur­rent Rip­mo (despite the 27.5" rear wheel), the bike main­tains an equi­lib­ri­um between agili­ty and stability. FIVE SIZES In order to place every size rid­er in the same position over the rear wheel, the HD's seat tube angles get steep­er as frame size increases. With four sizes, this would have result­ed in larger jumps in reach, so we added a fifth size. The small­er incre­ments across five sizes means that you can find just the right size. We encourage rid­ers to choose their bike size based on their desired reach and top tube measurements. COIL COMPATIBLE Our upper link sus­pen­sion lay­out is pro­gres­sive enough to be sen­si­tive off the top, yet sup­port­ive enough for the biggest hits. It is also com­pat­i­ble with all coil shocks, for those longer race stages that can tax air shock performance. DW-LINK The sus­pen­sion lay­out may be new, but it's still DW-Link. The inher­ent effi­cien­cy means you don't need an over­damped shock to climb well. Less shock damp­ing allows the wheels to stay plant­ed on the ground, pro­vid­ing more trac­tion and that hov­er-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree. TRACTION TUNE Our cus­tom tuned front and rear sus­pen­sion fea­ture extra light high speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through rough ter­rain like a tro­phy truck storm­ing through a set of whoops. BUSHINGS Tired of buy­ing bear­ings each sea­son? So were we. That's why we've strate­gi­cal­ly employed bush­ings where they're most effec­tive and bear­ings else­where. The IGUS bush­ings in our low­er link are not only lighter and stiffer, they're vir­tu­al­ly main­te­nance-free. We believe so strongly in them, we back them with free life­time replacement. LIGHTWEIGHT PREMIUM CARBON All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our com­plete Enduro ready builds weigh as lit­tle as 32 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out a beau­ti­ful moment indeed. PROTECT YOUR INVESTMENT A thick rub­ber down­tube pro­tec­tor deflects debris, while our chain­stay pro­tec­tor fea­tures thick raised sec­tions to help damp­en chain slap noise. And our sim­­ple-yet-ele­­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful. LIFETIME WARRANTY If it's our fault, we'll fix it. Sim­ple as that.
$3,949.00 - $5,199.00 $5,199.00 Up to 24% Off
Introducing the Exie for all. Sharing the same geometry and performance as the World Cup winning Exie USA, our newest offering is handbuilt in Vietnam. It's everything we love about our US made offering (albeit ~250g heavier) in a wallet-friendly build. SIZE SPECIFIC SEAT ANGLES Whether you're rac­ing short track or on a mul­ti day epic, the Exie's seat tube angles allow you to har­ness your strongest mus­cles, while reduc­ing any potential knee or wrist strain. We've also steep­ened the seat tube angles as the frames get larg­er, to allow rid­ers with dif­fer­ent inseams to achieve the same rid­ing positions. DW-LINK SUSPENSION Don't squan­der a sin­gle watt. Our dw-link sus­pen­sion plat­form offers incred­i­ble climb­ing effi­cien­cy and trac­tion along with plush, down­hill-crush­ing goodness. RIDE MORE, WRENCH LESS We use bush­ings where it makes sense and bear­ings where it doesn't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance free. We've also added fea­tures like a thread­ed bot­tom brack­et to help make any future main­te­nance easy. INTERNAL CABLE ROUTING Inter­nal cable rout­ing doesn't have to be a pain. We've added inter­nal tubes to our tubes, no pick­sets, flash­lights, or swear words required. 2.4" TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but whatever you run, you're not lim­it­ed by width. 2X BOTTLE CLEARANCE The Exie has clear­ance for two water bot­tles inside the front tri­an­gle on every size frame. INTEGRATED CHAIN GUIDE Drop the ham­mer, not your chain. LIFETIME WARRANTY If it's our fault, we'll fix it. Sim­ple as that.
$2,900.00 - $3,799.00 $3,799.00 Up to 24% Off
The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. IT'S METAL Over our long tenure from moun­tain biking's awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we've exper­i­ment­ed with steel, alu­minum and tita­ni­um—remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we've part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. AIR & COIL COMPATIBLE The Rip­mo AF is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. It allows for coil's lin­ear­i­ty to thrive and we spec air shocks with tunes that pro­vide pop with­out feel­ing too harsh. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. 2.6" TIRE CLEARANCE Ibis helped pio­neer the wide rim rev­o­lu­tion, which inspired the new crop of wider 2.4"-2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures which results in elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing straight line speed. PICK YOUR SIZE We use words like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low stan­dovers give you the abil­i­ty to size your frame based on reach and preference. LONG DROPPER POST What's bet­ter than a drop­per post? A longer one. Our frames are designed to accom­mo­date the longest drop­per posts pos­si­ble. Rid­ers over 5'8 (or 173cm) can eas­i­ly run a 185mm drop­per post, while folks between 5' and 5'8 (152cm-172cm) can use a post 125mm or longer depend­ing on inseam length. REMOVABLE ISCG05 MOUNT Our option­al ISCG 05 mount is there if you want it, remov­able if you don't. SEVEN YEAR WARRANTY We stand behind our prod­ucts. If it's our fault, we'll fix it. Our alu­minum frames are backed by the same 7 year war­ran­ty and excel­lent cus­tomer ser­vice as our car­bon products. - Image is representational and may differ from build spec
$2,800.00 - $3,799.00 $3,099.00 - $3,799.00 Up to 26% Off
What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that's exactly what we did for the Ripmo V2S. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. GEOMETRY The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works - all day up, all day down, all day in between. REVISED SWINGARM The Rip­mo V2S fea­tures a new UDH dérailleur for max­i­mum future com­pat­i­bil­i­ty and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay. TRACTION TUNE Our cus­tom tuned front and rear sus­pen­sion fea­ture extra light high-speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2S is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 - 150mm, pend­ing your pref­er­ence and inseam length. Our short­er seat-tube lengths and low stan­dovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance - no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side, should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A thick rub­ber down­tube pro­tec­tor deflects debris, while our chain­stay pro­tec­tor fea­tures thick raised sec­tions to help damp­en chain slap noise. And our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful. - Image is representational and may differ from build spec
$2,724.00 - $3,699.00 $3,699.00 Up to 26% Off
The DV9 is back! A do-it-all carbon fiber hardtail designed to take you from the trailhead to the starting line, with a session at the pump track in between. Lighter weight, with up to date geometry, and engineered to the same exacting standards as the rest of our line, it packs a ton of performance in a more accessible price.
Page 1 of 1