Full-Suspension

The Exie is a World-Cup capable cross-country race bike that flat out shreds. With a sub 2,000g frame weight and dw-link suspension, it offers a stunning combination of pedaling efficiency and downhill performance. We designed, built, and test­ed it in our Santa Cruz factory, which is pow­ered by the warm Cal­i­for­nia sunshine. We build each Exie in our North­ern Cal­i­for­nia fac­to­ry. This gives us the utmost con­trol, which enable us to hit remark­able frame strength, stiff­ness, and weight tar­gets for this frame. MADE IN USA!

What if we took everybody's favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that's exactly what we did for the Ripmo V2S. Active ingredients include: 29" wheels, berm-defying cornering tendencies, and a love for long rides. GEOMETRY The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn't wan­der while climb­ing, and doesn't hold you back descend­ing. It works - all day up, all day down, all day in between. REVISED SWINGARM The Rip­mo V2S fea­tures a new UDH dérailleur for max­i­mum future com­pat­i­bil­i­ty and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay. TRACTION TUNE Our cus­tom tuned front and rear sus­pen­sion fea­ture extra light high speed com­pres­sion and rebound damp­ing to deliv­er unpar­al­leled trac­tion. This allows the wheels to flut­ter through ter­rain like a tro­phy truck storm­ing through a set of whoops. COIL COMPATIBLE The Rip­mo V2S is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. DROPPER POST CLEARANCE Mo' drop­per, mo' bet­ter. On small frames, you can run 125 - 150mm, pend­ing your pref­er­ence and inseam length. Our short­er seat-tube lengths and low stan­dovers allow you to choose your size based on your reach preference. TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but what­ev­er you run, know that you're not lim­it­ed by width. BUSHINGS Tired of hit­ting "pur­chase" on anoth­er set of bear­ings each sea­son? So were we. That's why we use bush­ings where they make sense, and bear­ings where they don't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance free. We believe so strong­ly in them, we back them with a free life­time replacement. LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance - no mat­ter how much you spend. The Rip­mo weighs a svelte 6.25 lbs with a DPX2 shock and com­plete builds start at 28 lbs. INTERNAL CABLE ROUTING Bikes that look pret­ty on the out­side, should look pret­ty on the inside. We use car­bon fiber tubes mold­ed with­in each frame. Push the cable in, watch it pop out, a beau­ti­ful moment indeed. REMOVABLE ISCG MOUNT So, you're too fast for nar­row-wide chain reten­tion on its own? Chal­lenge accept­ed. Our remov­able ISCG tabs allow shred­ders to bolt on a chain guide, while the rest of us can shave grams. PROTECT YOUR INVESTMENT A thick rub­ber down­tube pro­tec­tor deflects debris, while our chain­stay pro­tec­tor fea­tures thick raised sec­tions to help damp­en chain slap noise. And our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics.

Introducing the Exie for all. Sharing the same geometry and performance as the World Cup winning Exie USA, our newest offering is handbuilt in Vietnam. It’s everything we love about our US made offering (albeit ~250g heavier) in a wallet-friendly build.

The Ripmo AF (Aluminum Frame) brings the award-winning performance of the carbon Ripmo to a wider, rowdier audience. It’s everything we love from the carbon Ripmo, plus a few tweaks. IT'S METAL Over our long tenure from moun­tain biking's awk­ward ado­les­cence to its cur­rent any­thing-shred­dy era, we've exper­i­ment­ed with steel, alu­minum and tita­ni­um—remem­ber the Bow-Ti, the first super­bike? We remem­ber the met­al times too, and it feels good to offer a pre­mi­um ride expe­ri­ence to our broad­en­ing fam­i­ly of rid­ers, cour­tesy of durable, afford­able alu­minum alloy. MODERN GEOMETRY With a steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, the Rip­mo AF places rid­ers cen­tral­ly and upright over the bot­tom brack­et. It makes for an effi­cient posi­tion that can go the long haul with­out plac­ing too much weight on its slack, 64.9-degree head­tube angle. A 44mm reduced-off­set fork is more sure­foot­ed on steep descents and stead­ies high speeds. Bet­ter up, bet­ter down. DW LINK Since 2005, we've part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, which has been proven repeat­ed­ly at the high­est lev­els of racing. AIR & COIL COMPATIBLE The Rip­mo AF is com­pat­i­ble with both coil and air shocks due to a more pro­gres­sive lever­age rate. It allows for coil's lin­ear­i­ty to thrive and we spec air shocks with tunes that pro­vide pop with­out feel­ing too harsh. On the trail, it gives the sus­pen­sion a sup­ple feel through­out the entire­ty of the stroke, enhanc­ing trac­tion no mat­ter how deep you dig. 2.6" TIRE CLEARANCE Ibis helped pio­neer the wide rim rev­o­lu­tion, which inspired the new crop of wider 2.4"-2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures which results in elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing straight line speed. PICK YOUR SIZE We use words like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low stan­dovers give you the abil­i­ty to size your frame based on reach and preference. LONG DROPPER POST What's bet­ter than a drop­per post? A longer one. Our frames are designed to accom­mo­date the longest drop­per posts pos­si­ble. Rid­ers over 5'8 (or 173cm) can eas­i­ly run a 185mm drop­per post, while folks between 5' and 5'8 (152cm-172cm) can use a post 125mm or longer depend­ing on inseam length. REMOVABLE ISCG05 MOUNT Our option­al ISCG 05 mount is there if you want it, remov­able if you don't. SEVEN YEAR WARRANTY We stand behind our prod­ucts. If it's our fault, we'll fix it. Our alu­minum frames are backed by the same 7 year war­ran­ty and excel­lent cus­tomer ser­vice as our car­bon products. - Image is representational and may differ from build spec

The Ripley AF is our beloved, category-defying, short-travel, singletrack-scorching Ripley - rendered in aluminum, with more aggressive geometry. All the sizzle and pop of the carbon Ripley, now available as a complete bike at a wallet friendly price.

The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29" trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it's equally happy popping off bonus lines as it is crushing all-day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er-off­set fork make it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. DW LINK Since 2005, we've part­nered with sus­pen­sion guru, Dave Weagle, on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing. LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it's easy to under­stand, but our ultra-low standovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you'll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out the shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4" – 2.6" tires. When paired togeth­er, this com­bo can be run at ultra-low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don't. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass, but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. REPLACEABLE DOWNTUBE PROTECTOR Our remov­able poly­car­bon­ate skid plate pro­tects your down­tube from sharp pointy things.

What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides. The Rip­mo and Rip­mo AF share the same steep, 76-degree seat tube angle and a rangy but not stratos­pher­ic reach, which places rid­ers cen­tral­ly over the ped­als. It makes for an effi­cient posi­tion that can go the long haul. The slack 64.9 head­tube angle and 44mm reduced-off set fork doesn’t wan­der while climb­ing, and doesn’t hold you back descend­ing. It works?—?all day up, all day down, all day in between.